Manufacturing Systems Laboratory

Department of Industrial Engineering – University of Brawijaya

Roland Engraver EGX-350

10 - 01 - 2015 mansyla


EGX-350 Engraver machine is a machine used to make engraving on the workpiece 2-dimensional or 3-dimensional such as acrylic, zinc, wax in accordance with the design that has been created. for chisel used, adjust the material to be engrave. One of the supporting software for this machine is Roland Engrave Studio, or can also manufacture the design using Corel Draw, Photoshop, and then the results are stored in .JPEG format that can be read by machine EGX-350 Engraver. The following is a specification of the EGX-350 Engraver machine.



Engraving Size Table size : 305 (W) x 230 (D) mm [12 (W) x 9.1 (D) in.]
Engraving Speed Mechanical resolutionX and Y axes: 0.0025 mm/step (0.0001 in./step)

Z axis: 0.00125 mm/step (0.0005 in./step)

Software resolution

0.01 mm/step or 0.025 mm/step (0.0004 in./step or 0.001 in./step)

Engraving Resolution Brushless DC motor, maximum 50 W
Image Formats 5,000 to 20,000 rpm
Dimensions USB (compliant with Universal Serial Bus Specification Revision 1.1) or serial (RS-232C-compliant)
Warranty Power consumption : 122 WattsPower requirements :

AC 100 to 120 V ±10%, 1.3 A, 50/60 Hz (overvoltage category II, IEC 60664-1); or AC 220 to 240 V ±10%, 0.6 A, 50/60 Hz (overvoltage category II, IEC 60664-1)