Manufacturing Systems Laboratory

Department of Industrial Engineering – University of Brawijaya

Roland Metaza MPX -90

10 - 01 - 2015 mansyla

Mesin Metaza

Metaza MPX-90 is used to make the engraving on objects made of some materials. This machine etch images with detailed points using a marker pin in pairs on his head. To chisel used, adjust the material to be sculpted. One of the supporting software for this machine is Metaza Studio, or can also manufacture the design using Corel Draw, Photoshop, and then the results are stored in .JPEG format that can be read by machine Metaza MPX-90. The following specifications of the machine Metaza MPX-90 can be seen on the table below.



Printable material Gold, silver, copper, platinum, brass, aluminiu, iron, stainless steel, etc., ( vicker haedness(HV) , of the printing surface must be 200 or less)
Loadable material size Maximum 100 mm (weidth) x 200 mm (leght) x 40 mm (thickness), or 200 mm (width)x 100mm (legth) x40 mm (thickness) (3.9 in. x 7.9 in. x 1.5 in.), or (7.9 in. x 3.9 in. x 1.5 in. )
Printing area 80 mm x 80 mm (3.1 in. x 3.1 in.)
Printing speed (default) 50 mm/ sec (1.9 in/sec) (photo), 33 mm/sec (1.2 in. /sec) high resolution/text)24 mm/sec (0.94 in./sec) (vector)
Power requirements Dedicated AC adapter       AC 100 V to 240V ± 10 % 50/60 Hz
Machine                                 DC 19 V 1.6 A
Exterbal dimensions 286 mm (W) x 383 mm (D) x 308 mm (H)(11.3 in. (W) x 15.1 in. (D) x 12.2 in. (H)
Weight 10.8kg (23.8 lb.)